How To Restoring Entryway Chests And Cabinets

Posted on

Entryway Chests And Cabinets – Before you begin the restoration of the furniture, it is important to have it undergo a complete check to assess whether or not it is worth restoring. It is always better than the number of pieces that you must change does not exceed the number of pieces that can be keep. The basic tools to restore a piece of furniture are sandpaper of various sizes and hardness’s, brushes, cotton rags, screwdrivers, blades, aluminum scourers, cotton and a spatula. Avoid working outdoors: the wind and the sundry wood and paint. The idea is to work in a room with stable temperature and away from hot or cold spots.

And do not forget to protect yourself with a mask and rubber gloves. Before you get to work, clean the entryway chests and cabinets thoroughly. Just wipe it with a cloth moistens with water and some soap. Check all the furniture, especially the hidden parts, and let it dry completely. If the stains do not go away, after pickling or sanding the piece, repeat the process until they disappear. If stains are on the corners or moldings, replace them with a very hard toothbrush dipping in the solvent. Wet it often to remove dirt. After cleaning, you must remove the paint or varnish. To do this, apply paint stripper with a brush and remove it with a spatula.

Repeat the operation to remove the finish and clean the entryway chests and cabinets with a rag and solvent. At the end, pass fine sandpaper. To eradicate it, apply an anti sarcoma product with a brush in each hole and wrap the cabinet with plastic. It is important to completely cover the hole. It is recommend to renew the plastic every 48 hours and leave it cover for a minimum of four days. You can cover cracks with putty or natural wax to hide scratches and imperfections. Fill with a spatula, then sand the surface and repeat the operation until the crack disappears.

See also  Decorating Ideas with the Long Hallway Table

To return the original color to the area, paint it with oils of the tone of the wood. Bronze fittings are cleaning with soap and water. The rest of the metals are cover with a soft bristle brush moistened with vinegar or cola. The locks are scraped with oil and rubbed with a soft bristle metal brush. This beautiful entryway chests and cabinets of drawers were acquire by its owners in family heritage. After sanding and repainting, they only had to change the handles to make it look like new. If the fabric is not very deteriorating, a set up is enough to make it look like new.  Carefully detach it from the structure and, for thorough cleaning, take it to the dry cleaner.